How to Change a Low Beam Bulb in a 2005 Buick LeSabre
Needed:
10mm socket wrench
Large screwdriver
Small screwdriver
Replacement bulb
Open the hood.
As you are standing at the bumper looking over the headlight
assembly, you will see two screws that hold the assembly to the body. With the
10mm socket wrench remove these and set them aside.
With the large screwdriver loosen the assembly from the body
and pull the entire assembly away from the body.
By hand, turn the base of the low beam and pull it away from
the headlight assembly.
Once removed, take the small screwdriver and pry the bulb
from the base. Set it aside.
Snap the new bulb into the base.
Turn on the light to see if it is working.
Once you determine that the bulb is working, seat the base
back into the headlight assembly.
Insert the screws and tighten.
Close the hood.
Smile with the confidence that you changed this bulb and
saved yourself an hour’s labor charge. The entire process should take less than
15 minutes even if you’ve never done this before.
I do agree with all of the ideas you have presented for your post. They are really convincing and will certainly work. Still, the posts are very brief for newbies. May just you please extend them a bit from subsequent time? Thank you for the post.
ReplyDeleteDebeer Lacrosse Artic Glove